GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Saab 🢒 2005 🢒 9-7x 🢒 Vehicle Control Systems 🢒 Vehicle DTC Information 🢒 HVAC Control Module Replacement

Removal Procedure

    Object Number: 1681425 Size: SH
  1. Remove the I/P accessory trim plate. Refer to Instrument Panel Accessory Trim Plate Replacement .
  2. Remove the HVAC control module screws.
  3. Remove the HVAC control module from the instrument panel.
  4. Disconnect the electrical connectors from the HVAC control module.

Installation Procedure

    Object Number: 1681425 Size: SH
  1. Connect the electrical connectors to the HVAC control module.
  2. Install the HVAC control module into the I/P.

    3. Notice: Refer to Fastener Notice in the Preface section.

  3. Install the HVAC control module screws.

    4. Tighten
    Tighten the screws to 1.9 N·m (17 lb in).

  4. Install the I/P accessory trim plate. Refer to Instrument Panel Accessory Trim Plate Replacement .
  5. Refer to Control Module References for programming and setup information.