GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Saab 🢒 2005 🢒 9-7x 🢒 Body 🢒 Seats 🢒 Quarter Upper Trim Panel Replacement

Removal Procedure

    Object Number: 740432 Size: SH
  1. Remove the cargo shade/cover.
  2. Remove the screw that retains the trim panel to the body.
  3. Remove the cargo net retaining knobs.
  4. Remove the bolt that retains the seat belt upper guide to the body.
  5. Remove the rear upper quarter trim panel from the vehicle.

Installation Procedure

    Object Number: 740432 Size: SH
  1. Install the rear upper quarter trim panel to the vehicle.
  2. Install the seat belt retractor to the body.

    3. Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  3. Install the bolt that retains the rear seat belt upper guide to the body.

    4. Tighten
    Tighten the rear seat belt upper guide shoulder bolt to 70 N·m (52 lb ft).

  4. Install the screw that retains the rear upper quarter trim panel to the body.

    5. Tighten
    Tighten the rear upper quarter trim panel screw to 2 N·m (18 lb in).

  5. Install the cargo net retaining knobs.