GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Saab 🢒 2005 🢒 9-7x 🢒 Body 🢒 Wipers/Washer Systems 🢒 Windshield Wiper and Washer Switch Replacement

Removal Procedure

    Caution: Refer to SIR Caution in the Preface section.

  1. Disable the SIR system. Refer to SIR Disabling and Enabling in SIR.

    2. Object Number: 323839 Size: SH
  2. Remove the upper and lower trim covers. Refer to Steering Column Trim Covers Replacement.
  3. Remove all wire harness straps.
  4. Disconnect connectors, if necessary.

    5. Object Number: 323846 Size: SH
  5. Depress the top and bottom clips on the windshield wiper and washer switch assembly.
  6. Slide the windshield wiper and washer switch assembly away from the bracket to disengage.

Installation Procedure

    Object Number: 323846 Size: SH
  1. Slide the windshield wiper and washer switch assembly into the bracket until the clips engage.

    2. Object Number: 323839 Size: SH
  2. Route the wire harness assembly along the steering column jacket assembly.
  3. Connect the windshield wiper and washer switch assembly connector, if necessary.

    4. Object Number: 323835 Size: SH
  4. Install the wire harness strap (2) to the steering column tilt head assembly (1).
  5. Install the wire harness strap (2) to the wire harness assembly.

    6. Object Number: 323836 Size: SH
  6. Pop the wire harness assembly (1) into the wire harness strap (2).
  7. Install the upper and lower trim covers. Refer to Steering Column Trim Covers Replacement.
  8. Enable the SIR system. Refer to SIR Disabling and Enabling in SIR.