Preliminary Procedures

Remove the headlamp assembly. Refer to Headlamp Replacement .

1

Cover, Nozzle Headlamp Washer

Tip

1. Pull out on the nozzle cover to view the retainers on each side. Push in on the tabs to release the cover from the nozzle.
2. When reinstalling the nozzle cover, push inward to ensure that the cover locks to the place to the nozzle retainers.

2

Screw, Nozzle Headlamp Washer

Notice: Refer to Fastener Notice in the Preface section.

Tighten
2 N·m (18 lb in)

3

Washer, Nozzle Headlamp

Tip
Pull up on the nozzle head to remove it from the fascia.

4

Clamp, Nozzle Headlamp Washer

5

Hose, Nozzle Headlamp Washer

Tip
Have the new nozzle ready when removing the old nozzle to reduce loss of washer fluid.