Removal Procedure
- Remove the instrument panel (I/P) carrier. Refer to
Instrument Panel Carrier Replacement
.
- Remove the air temperature actuator - left (1) retaining screws.
- Disconnect the air temperature actuator - left electrical connector.
- Remove the air temperature actuator - left.
Installation Procedure
- Install the air temperature actuator - left (1).
Notice: Refer to Fastener Notice in the Preface section.
- Install the air temperature actuator - left retaining screws.
Tighten
Tighten the screws to 1.9 N·m (17 lb in).
- Connect the air temperature actuator - left electrical connector.
- Install the I/P carrier. Refer to
Instrument Panel Carrier Replacement
.
- Recalibrate the air temperature actuator on vehicles equipped with automatic climate control (C68). Refer to
Actuator Recalibration
.