GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Saab 🢒 2006 🢒 9-7x 🢒 Body 🢒 Instrument Panel, Gages, and Console 🢒 Ignition Switch Lock Cylinder Replacement

Removal Procedure
  1. Remove the console shift lever bezel. Refer to Console Shift Lever Bezel Replacement .
  2. Remove the ignition switch and lock cylinder assembly from the console to gain access to the lock cylinder. Refer to Ignition and Start Switch Replacement .
  3. Remove the bracket from the assembly.

    4. Object Number: 1554775 Size: SH
  4. Remove the ignition cylinder using the following steps:
    5. 4.1. Install the key into the key cylinder.
    4.2. Turn the key to the Accessory position.
    4.3. Push the locking tab (1).
    4.4. Pull up on the key.

Installation Procedure

    Object Number: 1554774 Size: SH
  1. Slide the lock cylinder into the ignition switch housing.
  2. Insure the lock tab on the cylinder is secure.
  3. Install the ignition switch. Refer to Ignition and Start Switch Replacement .
  4. Install the console shift lever bezel. Refer to Console Shift Lever Bezel Replacement .