GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Saab 🢒 2006 🢒 9-7x 🢒 Brakes 🢒 Antilock Brake System 🢒 Steering Wheel Position Sensor or Steering Shaft Lower Bearing Replacement

Removal Procedure

    Caution: Refer to SIR Caution in the Preface section.

  1. Disable the SIR System. Refer to SIR Disabling and Enabling in SIR.
  2. Verify the type of steering wheel position sensor before removal. Refer to Steering Wheel Position Sensor Centering .
  3. Remove the intermediate steering shaft. Refer to Upper Intermediate Steering Shaft Replacement .
  4. Disconnect the sensor.
  5. Remove the bracket from the steering jacket assembly.
  6. Remove the steering wheel position sensor.

Installation Procedure
  1. If reusing the existing steering wheel position sensor, verify the type of sensor you have before installing. Refer to Steering Wheel Position Sensor Centering .
  2. Install the steering wheel position sensor.
  3. Install the bracket onto the steering jacket assembly.
  4. Connect the steering wheel position sensor connector.
  5. Install the intermediate steering shaft. Refer to Upper Intermediate Steering Shaft Replacement .
  6. Enable the SIR system. Refer to SIR Disabling and Enabling in SIR.