- Inspect the case interior for cracks or porosity.
- Inspect the case to valve body surfaces for damage.
- Inspect the vent assembly for damage.
- Inspect all fluid passages with compressed air.
- Inspect the transaxle case bores for the following conditions:
| • | Sharp edges--Use a fine emery cloth to remove any sharp edges. |
- Inspect all bolt holes for thread damage. For thread repair procedure,
refer to
General Specifications
.
- Inspect the case interior for damage to the following components:
- Inspect the case exterior for the following conditions:
| • | Scarred or damaged gasket mating surfaces |
