For 1990-2009 cars only
- Inspect the wiring harness assembly (225) for:
- Position the wire harness assembly (225) onto the control valve body (300) and the pump cover (201).
- Mate each connector into its respective electrical component and engage the locking tabs.
- Secure the wiring harness conduit into the retaining clip (226) on the pump cover (201).
- Assemble the fluid temperature sensor (391) into the temperature sensor clip (390).
| • | Cut or pinched wires |
| • | Cut wire insulation |
| • | Bent or broken electrical connectors |
| • | Damaged terminal pins |
