The Remote Keyless Entry (RKE) transmitter functions will work up to 30 feet (9 m) away.

The RKE transmitter buttons will not operate when the key is in the ignition.

[block ] (Lock):  Press to lock all the doors. Press [block ] again within three seconds and the horn may chirp.

(Unlock): Press once to unlock the driver's door. The parking lamps may flash and the interior lights will come on. Press again and all remaining doors will unlock.

You can program different feedback settings through the Driver Information Center (DIC). For more information see Driver Information Center (DIC)

(Panic Alarm): Press to sound the horn. The headlamps and taillamps will also flash for up to 30 seconds. To turn the alarm off, press again, or wait 30 seconds, or start the vehicle.

Matching Transmitter(s) to Your Vehicle

Each remote keyless entry transmitter is coded to prevent another transmitter from unlocking your vehicle. If a transmitter is lost or stolen, a replacement can be purchased through your dealer. All transmitters need to be re-coded to match the new transmitter. The lost transmitter will no longer work after the new transmitters are re-coded. Each vehicle can have a maximum of four transmitters matched to it.

Battery Replacement

Replace the battery if the KEY FOB # BATTERY LOW message displays in the DIC. See "KEY FOB # BATTERY LOW" under DIC Warnings and Messages .

Notice: When replacing the battery, do not touch any of the circuitry on the transmitter. Static from your body could damage the transmitter.

To replace the battery in the remote keyless entry transmitter do the following:

1. Remove the screw from the back of the remote keyless entry cover to open the transmitter.
2. Remove the old battery. Do not use a metal object.
3. Insert the new battery. Replace with a CR2032 or equivalent battery.
4. Assemble the transmitter and replace the screw.