GM Service Manual Online
For 1990-2009 cars only

License Plate Pocket Applique Loose or Comes Off (Replace Applique)

Subject:License Plate Pocket Applique Loose or Comes Off (Replace Applique)

Models:2005-2006 Saab 9-7X



Condition

Some customers may comment that the chrome trim is loose or missing on the end gate.

Cause

The plastic stakes that retain the chrome applique to the license plate pocket may be weak and snapping off in the car wash or when grabbed by the edge when opening the end gate.

Correction

Replace the applique. Follow the procedure below.

  1. If the applique is still on the pocket but loose, grab the lower edge of the applique and pull the remainder off.
  2. Remove the emblem from the applique.
  3. Remove the license plate pocket and remove the remains of the plastic tabs that fell inside after the applique was removed. Refer to Handle And License Pocket-Rear Door Outside.
  4. Remove the plastic tabs from the new applique and use 3M™ Automotive Attachment Tape, P/N 06377, or equivalent.
  5. Clean the emblem and use 3M™ Automotive Attachment Tape, P/N 06377.
  6. Make sure that the surface is clean and dry and install the applique to the pocket and install the emblem.
  7. Install the license plate pocket. Refer to Handle And License Pocket-Rear Door Outside.

Parts Information

Part Number

Description

Qty

89044644

Plate Asm, Rear Compartment Lid Applique

1

Warranty Information (Saab Canadian Models)

For vehicles repaired under warranty, use:

Labor Operation

Description

Labor Time

B9779

R&R License Plate Pocket

0.6 hr

Add

Install Applique and Emblem

0.3 hr

Warranty Information (Saab U.S. Models)

For vehicles repaired under warranty, use:

Labor Operation

Description

Failed Object

Fault/Reason Code

Location Code

Warranty Type

Repair/Action Code

Labor Time

8417801

Replace Part License Plate Pocket

84178

78

0

01

01

0.6 hr

Add

Install Applique and Emblem

--

--

--

--

--

0.3 hr in 99 time