Scan Tool Parameter | Data List | Units Displayed | Typical Data Value |
|---|---|---|---|
Operating Conditions: Ignition ON/Engine OFF | |||
Battery Voltage Signal | Body, Generator Battery Control Module | Volts | 12.3 V |
Generator L Terminal Signal Command | Body, Generator Battery Control Module | Percent | 0 Percent |
Regulated Voltage Control Current Sensor | Body, Generator Battery Control Module | Amps | 1 Amp |
Running State of Charge | Body, Generator Battery Control Module | Percent | 90 Percent |
Scan Tool Parameter | Data List | Units Displayed | Typical Data Value |
|---|---|---|---|
Operating Conditions: Ignition ON/Engine OFF | |||
Crank Request Signal | Electrical/Theft Data | Yes/No | No |
Generator L Terminal Signal Command | Electrical/Theft Data | Off/On | Off |
Generator F Terminal Signal | Electrical/Theft Data | % | 10-90% |
Ignition 1 Signal | Electrical/Theft Data | volts | 9.6-14.4V |
PNP Switch | Electrical/Theft Data | Park/Neutral, In Gear | Park/Neutral |
Starter Relay Command | Electrical/Theft Data | Off/On | Off |
Starter Relay Circuit Status | Electrical/Theft Data | Incomplete, Short Gnd/Open, Short to B+, OK | OK |
Scan Tool Parameter | Data List | Units Displayed | Typical Data Value |
|---|---|---|---|
Operating Conditions: Ignition ON/Engine OFF | |||
Crank Request Signal | Engine Data 3 | Yes/No | No |
Generator L Terminal Signal Command | Engine Data 2 | Off/On | Off |
Generator F Terminal Signal | Engine Data 2 | % | 10-90% |
Ignition 1 Signal | Engine Data 1, Engine Data 2, Engine Data 3 | volts | 9.6-14.4V |
Starter Relay Command | Engine Data 3 | Off/On | Off |
Scan Tool Parameter | Data List | Units Displayed | Typical Data Value |
|---|---|---|---|
Operating Conditions: Ignition ON/Engine OFF | |||
TR Sw. | Transmission Data | Park, Reverse, Neutral, Drive 5, Drive 4, Drive 3, Drive 2, Drive 1 | Park |
