Camshaft Position Sensor Replacement for Saab 9-7x 2007

1. Remove the intake manifold. Refer to Intake Manifold Replacement .

Important: Clean the area around the camshaft position (CMP) sensor before removal in order to prevent debris from entering the engine.

2. Remove the CMP sensor bolt.
3. Remove the CMP sensor.

1. Install the CMP sensor.

Notice: Refer to Fastener Notice in the Preface section.

2. Install the CMP sensor bolt.

Tighten
Tighten the bolt to 29 N·m (21 lb ft).

3. Install the intake manifold. Refer to Intake Manifold Replacement .