For 1990-2009 cars only
EBCM Replacement
If the electronic brake control module (EBCM) is replaced, the following procedures must be performed:
| • | EBCM Reprogramming--Refer to Service Programming System (SPS) . |
| • | Revise the tire calibration using the Scan Tool Tire Size calibration function. |
EBCM Reprogramming
If the EBCM needs to be reprogrammed, refer to Service Programming System (SPS) .
Yaw Rate Sensor/Lateral Accelerometer Replacement
Replace the EBCM after replacing the yaw rate sensor/lateral accelerometer, and reprogram EBCM.
| • | EBCM Reprogramming--Refer to Service Programming System (SPS) . |
| • | Revise the tire calibration using the Scan Tool Tire Size calibration function. |
