Step | Action | Yes | No |
---|---|---|---|
DEFINITION: The steering wheel does not return to center after completing a turn. | |||
1 | Did you review the General Description and perform the necessary inspections? | Go to Step 2 | |
2 | Verify that memory steer is present. Does the system operate normally? | System OK | Go to Step 3 |
3 | Check the tire inflation and adjust to specifications. Refer to Vehicle Certification, Tire Placard, Anti-Theft, and Service Parts ID Label. Did you adjust the tire pressure? | Go to Step 14 | Go to Step 4 |
4 |
Did you find and correct the condition? | Go to Step 14 | Go to Step 5 |
5 |
Was the steering wheel abnormally difficult to rotate in either direction? | Go to Step 6 | Go to Step 10 |
6 |
Important: Do NOT rotate the steering wheel more than one complete revolution. Was the steering wheel abnormally difficult to rotate in either direction? | Go to Step 14 | Go to Step 7 |
7 |
Are either of the tie rod ends abnormally difficult to move? | Go to Step 11 | Go to Step 8 |
8 | Inspect for binding strut bearings or ball joints. Use your hands to push and pull the steering knuckle inboard and outboard. Are either of the steering knuckles abnormally difficult to move? | Go to Step 9 | Go to Step 13 |
9 | Inspect the wheel alignment and adjust as necessary. Refer to Wheel Alignment Measurement. Did you complete the wheel alignment? | Go to Step 14 | -- |
10 | Replace the outer tie rod end. Refer to Steering Linkage Outer Tie Rod Replacement. Did you complete the repair? | Go to Step 14 | -- |
11 | Replace the damaged ball joint. Refer to Upper Control Arm Ball Joint Replacement or Lower Control Arm Ball Joint Replacement. Did you complete the repair? | Go to Step 14 | -- |
12 | Replace the steering gear. Refer to Steering Gear Replacement. Did you complete the repair? | Go to Step 14 | -- |
13 | Repair the steering column as necessary. Refer to Steering Column Replacement. Did you complete the repair? | Go to Step 14 | -- |
14 | Operate the vehicle in order to verify the repair. Did you correct the condition? | System OK | Go to Step 3 |