Removal Procedure
- Open the side doors, right or left side.
- Remove the push pin retainers from the front door sealing weatherstrip located at the base of the pillar.
- Pull back the front door sealing weatherstrip in order to expose the weatherstrip side retainer screws.
- Remove the screws from the weatherstrip side retainer.
- Remove the weatherstrip side retainer from the windshield pillar.
Installation Procedure
- Install the weatherstrip side retainer to the windshield pillar.
Notice: Refer to Fastener Notice in the Preface section.
- Install the screws to the weatherstrip side retainer.
Tighten
Tighten the screws to the weatherstrip side retainer to 2 N·m (18 lb in).
- Install the push pin retainers to the front door sealing weatherstrip located at the base of the pillar.
- Close the doors.