Air Conditioning Not Cold, Malfunction Indicator Lamp On, DTC P0116 (Reprogram PCM)
| Subject: | Air Conditioning Not Cold, Malfunction Indicator Lamp On, DTC P0116 (Reprogram PCM) |
| Models: | 2007 Buick Rainier |
| 2007 Chevrolet TrailBlazer |
| 2007 GMC Envoy Models |
| 2007 Saab 9-7X |
| with 4.2L Engine (VIN S -- RPO LL8) |
Condition
Some customers may comment that the Air Conditioning (A/C) does not get cold enough. Others may comment that the Malfunction Indicator Lamp (MIL) is on. Technicians may find that Diagnostic Trouble Code (DTC) P0116 (Engine Coolant Temperature Sensor Performance) has been set in the Powertrain Control Module (PCM).
Cause
This condition may be caused by the software in the PCM that allows the P0116 to set. While the P0116 is active, the PCM will not allow the A/C compressor to engage.
Correction
Technicians are to reprogram the PCM in vehicles built prior to the following VIN breakpoints:
Vehicle | Engine | VIN of First Vehicle Built With Updated PCM |
|---|---|---|
Buick Rainier | 4.2L (VIN S -- RPO LL8) | 72133252 |
Chevrolet TrailBlazer | 4.2L (VIN S -- RPO LL8) | 72133236 |
GMC Envoy | 4.2L (VIN S -- RPO LL8) | 72133238 |
Saab 9-7X | 4.2L (VIN S -- RPO LL8) | 72800883 |
The updated PCM calibrations were released to dealerships that use the TIS2web application on August 23, 2006. They are contained in the new calibration entitled "New software with diagnostic enhancements for DTC P0483". The TIS satellite data update version 9.0 was broadcast to the field on September 3, 2006. For dealerships that use DVDs, the update will be included with version 9.0 that was mailed on September 13, 2006. As always, make sure your Tech 2® is updated with the latest software version. Refer to the Engine and Powertrain Control Module Programming and Setup procedures in SI for more information.
Warranty Information (excluding Saab U.S. Models)
For vehicles repaired under warranty, use:
Labor Operation | Description | Labor Time |
|---|---|---|
J6354 | Powertrain Control Module - Engine Reprogramming with SPS | Use Published Labor Operation Time |
Warranty Information (Saab U.S. Models)
For vehicles repaired under warranty, use:
Labor Operation | Description | Failed Object | Fault/Reason Code | Location Code | Warranty Type | Repair/Action Code | Labor Time |
|---|---|---|---|---|---|---|---|
2481001 | Powertrain Control Module - Engine Reprogramming with SPS | 24810 | 67 | 0 | 01 | 05 | Use Published Labor Operation Time |
