For 1990-2009 cars only
Removal Procedure
- Remove the trim panel. Refer to Rear Side Door Trim Panel Replacement .
- Remove the inner window belt sealing strip. Refer to Rear Side Door Window Inner Sealing Strip Replacement .
- Remove the outer window belt sealing strip. Refer to Rear Side Door Window Outer Sealing Strip Replacement .
- Remove the water deflector. Refer to Rear Side Door Water Deflector Replacement .
- Remove the window. Refer to Rear Side Door Window Replacement .
- Remove the bolt that retains the weatherstrip run channel to the door.
- Pull the weatherstrip/run channel from the window frame opening.
- carefully release the double sided tape attaching the molding to the outside of the door.
- Carefully twist the weatherstrip run channel and pull up at the top of the door frame.
- Remove the weatherstrip/run channel from the door.
Important: The quarter glass and weatherstrip/run channel is not serviceable and should be replaced only as an assembly.
Installation Procedure
- Install the weatherstrip/run channel to the door.
- Press the weatherstrip/run channel into the window frame opening.
- Position the tabs on the weatherstrip/run channel into the slots on the door.
- Attach the molding to the outside of the door with double sided tape.
- Install the weatherstrip/run channel retaining bolt.
- Install the window. Refer to Rear Side Door Window Replacement .
- Install the water deflector. Refer to Rear Side Door Water Deflector Replacement .
- Install the outer window belt sealing strip. Refer to Rear Side Door Window Outer Sealing Strip Replacement .
- Install the inner window belt sealing strip. Refer to Rear Side Door Window Inner Sealing Strip Replacement .
- Install the trim panel. Refer to Rear Side Door Trim Panel Replacement .
Notice: Refer to Fastener Notice in the Preface section.
Tighten
Tighten the bolt to 10 N·m (88 lb in).
