Caution: The high intensity discharge system produces high voltage and current. To reduce the risk of severe shocks and burns:

Caution: The high intensity discharge system produces high voltage and current. In order to reduce the risk of severe shocks and burns, the battery negative cable must be disconnected any time service work is being performed on or around the high intensity discharge system.

Notice: Refer to Fastener Notice in the Preface section.

Fastener Tightening Specifications: Refer to Fastener Tightening Specifications .

Preliminary Procedures

Remove the headlamp assembly. Refer to Headlamp Replacement .

1

Screw, Ballast

Tighten
3 N·m (27 lb in)

3

Ballast, Headlamp

Tip
Disconnect the electrical connector. DO NOT remove the harness from the headlamp housing.