GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Saab 🢒 2008 🢒 9-7x 🢒 Body Hardware and Trim 🢒 Instrument Panel and Console Trim 🢒 Instrument Panel Cluster Trim Plate Bezel Replacement

Removal Procedure
  1. Tilt the steering wheel to the full down position.
  2. Remove the left closeout/insulator panel . Refer to Instrument Panel Insulator Panel Replacement - Left Side .
  3. Remove the knee bolster trim panel. Refer to Driver Knee Bolster Panel Replacement .

    4. Object Number: 1554770 Size: SH
  4. Remove the screws that retain the bezel to the instrument panel (I/P).
  5. Remove the bezel from the I/P.

Installation Procedure

    Object Number: 1554770 Size: SH
  1. Install the bezel to the I/P.

    2. Notice: Refer to Fastener Notice in the Preface section.

  2. Install the screws that retain the bezel to the I/P.

    3. Tighten
    Tighten the screws to 2.5 N·m (22 lb in).

  3. Install the knee bolster trim panel. Refer to Driver Knee Bolster Panel Replacement .
  4. Install the left closeout/insulator panel. Refer to Instrument Panel Insulator Panel Replacement - Left Side .