| Table 1: | Navigation Radio Scan Tool Data Parameters |
| Table 2: | Navigation Radio Scan Tool Output Controls |
Parameter | System State | Expected Value | Description |
|---|---|---|---|
Operating Conditions: Ignition ON/Engine OFF/Radio ON | |||
Antenna Enable | -- | Active | The scan tool displays Active/Inactive. |
CD Changer | -- | Not Connected | The scan tool displays Connected/Not Connected. The scan tool displays Connected when the radio receives Class 2 information from the CD changer. |
Ign. Cycles Since last DTC | -- | Numeric | The scan tool displays 0-225 Cycles. The number of ignition cycles since a current DTC was set. |
Personalization Status | -- | Varies | The scan tool displays Unknown, Driver 1, Driver 2. This is the current personalization status. |
Signal Strength | -- | 51 dB | The scan tool displays the strength of the received signal in dB. |
Source Status | -- | Varies | The scan tool displays Off/Tuner/Radio Monitor/Cassette/CD/RDS Interrupt/ICDX/CD Changer/Phone Stereo/MD Changer/Single MD/Nav Voice Stereo/Enhanced Stereo/AD Stereo/Phone Mono/Nav Voice Mono/Enhanced mono/AD Mono/RSE Stereo/DRR Tuner. This is the current source/type of the signal being received/played. |
Theft Armed | -- | Learned VIN | The scan tool displays Learned VIN/No VIN. The Scan tool displays Learned VIN when the theft mode has been turned ON by recognizing a valid VIN. |
Theft Lock | -- | Unlocked | The scan tool displays Locked/Unlocked. The scan tool displays Unlocked when the radio receives the correct VIN information from the PCM via Class 2. |
Output Control | Description |
|---|---|
Antenna | This control will turn ON and OFF the GPS antenna for the navigation radio. |
Left Front Speakers | Commanding the speaker ON will turn OFF all speakers except this speaker. Commanding the speaker OFF will turn OFF all speakers. |
Left Rear Speakers | Commanding the speaker ON will turn OFF all speakers except this speaker. Commanding the speaker OFF will turn OFF all speakers. |
Right Front Speakers | Commanding the speaker ON will turn OFF all speakers except this speaker. Commanding the speaker OFF will turn OFF all speakers. |
Right Rear Speakers | Commanding the speaker ON will turn OFF all speakers except this speaker. Commanding the speaker OFF will turn OFF all speakers. |
Vin Relearn | This commands the navigation radio module to relearn the vehicle vin. |
