Preliminary Procedures

1. Open the hood.
2. Remove the headlamp assembly. Refer to Headlamp Replacement .
3. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .
4. Remove the front upper fascia. Refer to Front Bumper Upper Fascia Replacement .

1

Bolts, Housing Front Headlamp (Qty: 4)

Notice: Refer to Fastener Notice in the Preface section.

Tighten
8 N·m (71 lb in)

Tip
Loosen the side of fascia where that the headlamp housing is located. The fascia does not need to be completely removed to replace the headlamp housing.

2

Housing, Front Headlamp