On vehicles with this feature, the controls for the memory function are located on the driver door.
These buttons are used to program and recall memory settings for the driver's seating position and the adjustable pedals, if equipped. The settings for these features can be saved for up to two drivers.
To store the memory settings:
- Adjust the driver’s seat, including the seatback recliner and lumbar and the adjustable pedals, if equipped, to the desired position.
- Press and hold the 1 or 2 button of the memory control for three seconds. A double chime will sound to let you know that the position has been stored.
See Adjustable Throttle and Brake Pedal for more information.
To repeat the procedure for a second driver, follow the preceding steps, but press the other numbered memory control button.
To recall the memory settings:
| • | Press and release button 1 or 2 while the vehicle is in PARK (P). A single chime will sound and the memory position will be recalled. |
| • | If programmed to do so through the Driver Information Center (DIC), pressing the unlock button on the remote keyless entry transmitter will recall the preset driver's memory seat and adjustable pedals position. |
| • | If programmed to do so through the DIC, placing the key in the ignition will recall the driver’s memory seat and adjustable pedals positions. |
See "Seat Recall" under DIC Vehicle Customization for more information.
To stop recall movement of the memory seat feature at any time, press one of the memory buttons or power seat controls.
Easy Exit Seat
The control for the easy exit seat function is located on the driver’s door below the memory buttons 1 and 2. The easy exit seat button is used to program and recall the desired driver’s seat position when exiting or entering the vehicle. The power lumbar, recline, and, if equipped, adjustable pedal, positions will not be stored or recalled when using the easy exit seat function. The seat position can be saved for up to two drivers.
To store the easy exit seat position:
- Press and release the 1 or 2 button of the memory control for less than three seconds. The seat will move to the stored memory position.
- Adjust the seat to the desired exit position.
- Press and hold the easy exit seat button for more than three seconds. A double chime will sound to let you know that the position has been stored for the selected button 1 or 2.
To repeat the procedure for a second driver, follow the preceding steps, but press the other numbered memory control button.
To recall the easy exit seat position:
| • | Press the easy exit seat button on the memory control while the vehicle is in PARK (P). The seat will move to the stored exit position. |
| • | Or, if the easy exit seat feature is activated in the Driver Information Center (DIC), removing the key from the ignition will move the seat to the exit position. See "Easy Exit Seat" under DIC Vehicle Customization for more information on activating this feature in the DIC. |
If an easy exit seat position has not been stored, the default position is all the way rearward.
