Read this manual thoroughly to become familiar with how the navigation system operates.

The navigation system includes navigation and audio functions.

While entering the vehicle or when turning the vehicle off, some DVD Map Disc noise is normal.

Keeping your eyes on the road and your mind on the drive is important for safe driving. The navigation system has built-in features intended to help keep your eyes on the road and mind on the drive. Some features may be disabled while driving. Note that these functions will be grayed-out. A grayed-out function indicates it is not available when the vehicle is moving.

All functions are available when the vehicle is parked. Do the following before driving:

Caution: Taking your eyes off the road too long or too often while using the navigation system could cause a crash resulting in injury or death to you or others. Focus your attention on driving.

Caution: Avoid looking too long or too often at the moving map on the navigation screen. This could cause a crash and you or others can be injured or killed. Use the turn-by-turn voice guidance directions whenever possible.

Use the navigation system to:

You should always be alert and obey traffic and roadway laws and instructions, regardless of the guidance from the navigation system. Because the navigation system uses street map information that does not include all traffic restrictions or the latest road changes, it may suggest using a road that is now closed for construction or a turn that is prohibited by signs at the intersection. Because the system uses limited information, you must always evaluate whether following the system's directions is safe and legal for the current conditions.

When the navigation system is turned on, a screen may appear with the information below, and you must read and acknowledge the information it contains.

Caution: Taking your eyes off the road for extended periods could cause a crash resulting in injury or death to you or others.

To help avoid a crash in which you or others could be killed:

After you acknowledge the start up information you will be able to access the NAV (navigation) and DEST (destination) functions. Once accessed, you can enter or delete information in the navigation system or access other functions. See instructions later in this section.

Every fifty times the vehicle is started and the navigation system is turned on, the Caution screen appears. After reading the caution, select OK to load the map DVD information. If OK is not selected, all hard keys except for NAV (Navigation) and DEST (Destination) can be accessed. You can also press the NAV hard key to have this Caution screen appear.

When getting started, set the navigation system to your preference or delete information you may have entered using various options.

This navigation system can record and store destinations. At times, such as when selling or returning a leased vehicle, you may want to delete these destinations. Refer to the following sections to delete the destination information that has been stored.

See "Delete" under "Edit Route" under Navigation Menu for deleting the current destination.

See "Memory Points", "Preset Dest." (Destination), "Register Home" and "Del. Prev. Dest." (Delete Previous Destination) under "Memory Points" under Navigation Menu for deleting stored destinations.

To set preset radio stations:

1. Press (power/volume knob) to turn the system on.
2. Press the BAND hard key to access the band menu and select the desired band (AM, FM1, FM2, XM1, or XM2 (if equipped).
3. Use (tuning knob) or the SEEK hard key arrows to select a station.
4. Touch and hold one of the six screen buttons at the bottom of the screen until a beep is heard or the station is displayed on the selected preset button.

To set the time:

1. Press to turn the system on.
2. Press the CONFIG hard key.
3. Touch the Clock screen button.
4. Scroll through the Time Zones until the desired time zone highlights.
5. Touch the Daylight Savings screen button.

The time is now set. Touch the Manual Adjust screen button if further adjusting of the time is needed. The radio uses the GPS satellite to set the time. The vehicle needs to be in an open area to receive the signal. See Global Positioning System (GPS) for more information.

To load a DVD map disc, do the following:

1. Press to turn the system on.
2. Press and hold (eject key), for about 10 seconds, to tilt the screen forward.
3. Insert the DVD map disc into the DVD slot.

Notice: Pressing directly on the navigation screen may cause damage. Repairs would not be covered by the vehicle's warranty. Do not press directly on the navigation screen.

4. To close the screen, slightly push up on the two outer top corners until the screen is in position, then push the screen in, by pushing on the four outer corners, until a click is heard.
5. A notice may appear. Touch the Next screen button to proceed.

Before entering an Address, Point of Interest, Home, or Preset Destination, select the appropriate search area that contains the final destination. The vehicle must be in P (Park) to perform this operation.

Setting the Search Area

To set the search area:

1. If a DVD map disc is not currently loaded, see "Loading a DVD Map Disc" earlier in this section. If a map disc is currently loaded, proceed to Step 2.
2. Press to turn the system on.
3. Touch the Dest screen button.
4. Touch the Change screen button.
5. Touch the appropriate Search Area numbered screen button that contains the final destination.

The system returns to the Destination menu.

Entering an Address

A destination can be set by entering an address. To enter an address:

1. If a DVD map disc is not currently loaded, see "Loading a DVD Map Disc" earlier in this section. If a map disc is currently loaded, proceed to Step 2.
2. Press to turn the system on.
3. Touch the Dest screen button.
4. Verify that the selected Search Area is correct.
5. Touch the Address screen button.
6. Enter the city name using the alpha keypad on the screen.
7. Select the city name from the list by touching the screen button next to the correct city name.
8. Enter the street name using the alpha keypad on the screen.

Do not enter directional information or street type, and use the space symbol screen button ( ) between street or city names. For example, the street name N. Royal Oak Rd. should be entered as royal oak. Use the backspace ( ) screen button if an incorrect character has been entered.

9. Select the desired street name from the list by touching the screen button next to the correct street name.
10. Enter the address number using the numeric keypad on the screen. The correct range may have to be selected for the address number, then enter the desired address and touch the OK screen button. The map screen displays.
11. Touch the Set Destination screen button. The address entry is now complete.
12. Touch the Route screen button.
13. Touch the Start screen button.
14. Once driving begins, an audio prompt states "Proceed to the highlighted route." The system is now in route guidance mode.

Entering a Point of Interest (POI)

To set a destination by entering a Point of Interest (POI):

1. If a DVD map disc is not currently loaded, see "Loading a DVD Map Disc" earlier in this section. If a map disc is currently loaded, proceed to Step 2.
2. Press to turn the system on.
3. Touch the Dest screen button.
4. Verify that the selected Search Area is correct.
5. Touch the POI screen button.
6. Enter the specific title of the POI in the Name space (i.e. Washington Monument) using the alpha keypad on the screen.

•	If there are POIs with the same name, spell out the name and then touch the List screen button (McDonald's restaurant vs. McDonald corporate office).

•	Select the business desired.

•	The system lists the POIs in alphabetical order or, if there are multiple POIs with the same name, the system lists the POIs in order of distance from your location.

•	Touch the screen button next to the address of the POI desired.

7. Touch the Set Destination screen button. The POI entry is now complete.
8. Touch the Route screen button.
9. Touch the Start screen button.
10. Once driving begins, an audio prompt states "Proceed to the highlighted route." The system is now in route guidance mode.

Using the Category or City selections aid the system in finding the POI by limiting the search options.

Setting Home Destination

1. If a DVD map disc is not currently loaded, see "Loading a DVD Map Disc" earlier in this section. If a map disc is currently loaded, proceed to Step 2.
2. Press to turn the system on.
3. Touch the Nav  (navigation) menu screen button.
4. Touch the Memory Points screen button.
5. Touch the Register Home screen button.
6. Touch the Address screen button and then enter all address information.
7. Touch OK. The map screen displays.
8. Touch the Register Point screen button to store the home address as a memory point.

The home symbol is now available on the Destination screen. See "Using Your Home or Preset Destinations" later to use the home destination as a planned route.

Setting Preset Destinations

1. If a DVD map disc is not currently loaded, see "Loading a DVD Map Disc" earlier in this section. If a map disc is currently loaded, proceed to Step 2.
2. Press to turn the system on.
3. Touch the Nav  (navigation) menu screen button.
4. Touch the Memory Points screen button.
5. Touch the Register screen button under the Preset Dest. column.
6. Touch one of the five preset buttons.
7. Touch the Address screen button and then enter the address information.
8. Touch OK. The map screen displays.
9. Touch the Register Point screen button to store the memory point.

The preset destination number is now available on the Destination screen. See "Using Your Home or Preset Destinations" later to use preset destinations as a planned route.

These destinations are available for selection while driving.

1. If a DVD map disc is not currently loaded, see "Loading a DVD Map Disc" earlier in this section. If a map disc is currently loaded, proceed to Step 2.
2. Press the power/volume knob to turn the system on.
3. Touch the Dest screen button.
4. Touch the (Home symbol) or one of the available Preset Destination symbols at the bottom of the Destination screen. The map screen displays.
5. If currently driving on a route, touch the Set Destination screen button. The system calculates the new route. If not currently driving on a route, the system automatically calculates a route to the home or preset destination selected.
6. Touch the Route screen button.
7. Touch the Start screen button.
8. Once driving begins, or if already driving, an audio prompt states "Proceed to the highlighted route." The system is now in route guidance mode.

Guidance is canceled once you arrive at the final destination. To cancel guidance prior to arrival at the final destination:

1. From the map screen, touch the Nav Options screen button.
2. Touch the Cancel Route screen button.
3. Touch the Yes screen button to confirm cancellation.