Air Cleaner Resonator Outlet Duct Replacement for Saab 9-7x 2009

1. Disconnect the positive crankcase ventilation (PCV) fresh air tube (2) from the air cleaner resonator outlet duct (1).



2. Loosen the clamps at the following:

•	Mass air flow (MAF)/intake air temperature (IAT) sensor

•	Throttle body

3. Remove the air cleaner outlet duct bolt.
4. Remove the air cleaner outlet duct.

1. Install the air cleaner outlet duct.

Caution: Refer to Fastener Caution in the Preface section.

2. Install the air cleaner outlet duct bolt and tighten to 10 N·m (89 lb in).
3. Tighten the clamps at the following:

•	MAF/IAT sensor

•	Throttle body

•	Tighten the clamps to 7 N·m (62 lb in).




4. Connect the PCV fresh air tube (2) to the air cleaner resonator outlet duct (1).