For 1990-2009 cars only
Removal Procedure
- Remove the front bucket seat assembly from the vehicle. Refer to Front Seat Replacement - Bucket.
- Remove the seat cushion trim panel. Refer to Seat Cushion Outer Trim Panel Replacement.
- Remove the seat belt buckle nut.
- Disconnect the black electrical connector (6) from the seat back harness.
- Disconnect the black electrical connector (3) from the seat belt buckle.
- Disconnect the gray lumbar electrical connector (5), if equipped.
- Remove the SIR harness (2) from the harness clips (1,4), and remove the SIR harness from the seat.
- Remove the 4 nuts that secure the seat pan to the power seat adjuster frame.
- Remove the seat back. Refer to Front Seat Back Replacement.
Installation Procedure
- Install the seat back. Refer to Front Seat Back Replacement.
- Install the 4 nuts that secure the seat pan to the power seat adjuster frame and tighten to 25 N·m (18 lb ft).
- Install the SIR harness (2) to the seat clips (1,4).
- Connect the gray lumbar electrical connector (5), if equipped.
- Connect the black electrical connector (3) to the seat belt buckle.
- Connect the black electrical connector (6) to the seat back harness.
- Install the seat belt buckle to the seat with the nut and tighten to 55 N·m (41 lb ft).
- Install the seat cushion trim panel. Refer to Seat Cushion Outer Trim Panel Replacement.
- Install the front bucket seat assembly to the vehicle. Refer to Front Seat Replacement - Bucket.
- If the vehicle is equipped with memory seats, calibrate the seat. Refer to Memory Seat Calibration.
Caution: Refer to Fastener Caution in the Preface section.
