For 1990-2009 cars only
Removal Procedure
- Disconnect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection.
- Press tabs (1) inward and lift to remove the junction block cover.
- Pull upward on the fuse relay center cover (1) to release the retaining tabs and remove the cover.
- Note the location and remove the harness end bolts (2) and remove the harness ends from the fuse relay center.
- Remove the fuse relay center bolts (3) and remove the fuse relay center from the junction block bracket.
- Pull downward on the wiring harness ends to remove from the bottom of the fuse relay center.
- Remove the junction block bracket retaining bolts (1) and remove the junction block bracket from the vehicle.
Installation Procedure
- Position the junction block bracket and install the bolts (1). Tighten the junction block bracket bolts to 6 N·m (53 lb in).
- Align the wiring harnesses and install the fuse relay center.
- Install the fuse relay center bolts (3) and tighten to 6 N·m (53 lb in).
- Install the harness end bolts (2).
- Install the fuse relay center cover (1) over the relay center bolts. Press downward to engage the tabs.
- Install the junction block cover. Press downward to engage the tabs.
Caution: Refer to Fastener Caution in the Preface section.
