Removal Procedure
- Remove the overhead console. Refer to
Roof Console Replacement.
- Disconnect the microphone electrical connector (3).
- Remove the 2 retaining screws to the microphone.
- Remove the microphone (2) from the overhead console.
Installation Procedure
- Install the microphone (2) to the overhead console.
Caution: Refer to Fastener Caution in the Preface section.
- Install the 2 microphone retaining screws and tighten to
0.8 N·m (7 lb in).
- Connect the microphone electrical connector (3).
- Install the overhead console. Refer to
Roof Console Replacement.