Floor Shift Control Knob Replacement for Saab 9-7x 2009

1

Shift Control Boot

Tip
Push in at the base of the boot to release the locking tabs from the console. When installing the boot press the boot retainer into the console to engage the locking tabs. Ensure the boot is not twisted when installed.

2

Traction Control Switch Electrical Connector

Tip
When installing wrap the connector wire around the front of the shift lever then connect to the mating connector on the shift control.

3

Shift Control Knob Set Screw

Caution: Refer to Fastener Caution in the Preface section.

Tighten
2 N·m (18 lb in)

4

Shift Control Knob