Transfer Case Rear Output Shaft Speed Sensor Replacement - Right Side for Saab 9-7x 2009

1. Raise the vehicle. Refer to Lifting and Jacking the Vehicle.



2. Remove the transfer case right rear speed sensor electrical connector.
3. Remove the transfer case right rear speed sensor.

Caution: Refer to Fastener Caution in the Preface section.




1. Install the transfer case right rear speed sensor and tighten to 17 N·m (13 lb ft).
2. Install the transfer case right rear speed sensor electrical connector.
3. Lower the vehicle. Refer to Lifting and Jacking the Vehicle.