GM Service Manual Online
For 1990-2009 cars only

Removal Procedure


    Object Number: 739853  Size: SH
  1. Open the side doors, right or left side.
  2. Remove the push pin retainers from the front door sealing weatherstrip located at the base of the pillar.
  3. Pull back the front door sealing weatherstrip in order to expose the weatherstrip side retainer screws.
  4. Remove the screws from the weatherstrip side retainer.
  5. Remove the weatherstrip side retainer from the windshield pillar.

Installation Procedure


    Object Number: 739853  Size: SH
  1. Install the weatherstrip side retainer to the windshield pillar.
  2. Caution: Refer to Fastener Caution in the Preface section.

  3. Install the screws to the weatherstrip side retainer and tighten to 2 N·m (18 lb in).
  4. Install the push pin retainers to the front door sealing weatherstrip located at the base of the pillar.
  5. Close the doors.