Preliminary Procedures

1. Open the hood.
2. Remove the headlamp assembly. Refer to Headlamp Replacement.
3. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle.
4. Remove the front upper fascia. Refer to Front Bumper Upper Fascia Replacement.

1

Bolts, Housing Front Headlamp (Qty: 4)

Caution: Refer to Fastener Caution in the Preface section.

Tighten
8 N·m (71 lb in)

Tip
Loosen the side of fascia where that the headlamp housing is located. The fascia does not need to be completely removed to replace the headlamp housing.

2

Housing, Front Headlamp