GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Saab 🢒 2009 🢒 9-7x 🢒 Power and Signal Distribution 🢒 Wiring Systems and Power Management 🢒 Ignition and Start Switch Replacement

Removal Procedure
  1. Remove the console shift lever bezel. Refer to Console Shift Lever Bezel Replacement.
  2. Remove the ignition switch assembly screws.

    3. Object Number: 1554774 Size: SH
  3. Disconnect the electrical connector.
  4. Remove the ignition switch.

Installation Procedure

    Object Number: 1554774 Size: SH
  1. Locate the ignition switch to the console.

    2. Caution: Refer to Fastener Caution in the Preface section.

  2. Install the screws securing the switch to the console and tighten to 2 N·m (18 lb in).
  3. Connect the electrical connector.
  4. Install the shift lever bezel. Refer to Console Shift Lever Bezel Replacement.