GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Saab 🢒 2009 🢒 9-7x 🢒 Seats 🢒 Seat Hardware, Trim, and Upholstery 🢒 Rear Seat Replacement

Removal Procedure
  1. Remove the communication interface module if removing the right-hand rear seat. Refer to Communication Interface Module Replacement.

    2. Object Number: 827901 Size: SH
  2. Remove the front 2 rear seat mounting nuts (2) securing the seat to the vehicle.
  3. Fold the seat to the stowed position.
  4. Remove the rear 2 rear seat mounting nuts (2) securing the seat to the vehicle.
  5. Remove the seat from the vehicle.

Installation Procedure

    Object Number: 827901 Size: SH
  1. Position the seat onto the floor studs. The seat should be in the folded position.
  2. Install the 2 rear nuts (2). Do not tighten the nuts.
  3. Unfold the seat to ensure that the seat latch (1) properly engages the latch bar (3) on the floor.

    4. Caution: Refer to Fastener Caution in the Preface section.

  4. Install the front 2 rear seat mounting nuts (2) and tighten to 45 N·m (33 lb ft).
  5. Fold the seat to the stowed position.
  6. Tighten the 2 rear seat mounting nuts (2) to 45 N·m (33 lb ft).
  7. Install the communication interface module if installing the right-hand rear seat. Refer to Communication Interface Module Replacement.