For 1990-2009 cars only
Removal Procedure
- Remove the rear seat back assembly. Refer to Rear Seat Number 1 Back Replacement.
- Remove the rear seat belt anchor nut from the seat belt buckle bracket.
- Remove the rear seat back seat belt bezel by pressing in the buttons (1) on the plastic retainers.
- Remove the seat belt bezel from the seat belt.
- Remove the seat back cover and pad. Refer to Rear Seat Back Cushion Cover and Pad Replacement.
- Remove the seat belt from the retractor bracket by guiding it through the slot.
- Remove the rear seat belt center retractor retaining nut.
- Remove the center retractor assembly by pulling the push pin from the seat back frame.
- Remove the seat belt retractor bracket bolt (1) from the bracket and seat back frame.
- Remove the seat belt retractor bracket from the seat back frame.
Installation Procedure
- Position the seat belt retractor bracket on the seat back frame.
- Install the seat belt retractor bracket bolt (1) to the bracket and seat back frame and tighten to 55 N·m (40 lb ft).
- Position the seat belt retractor assembly onto the seat back frame.
- Install the push pin on the seat back retractor to the seat back frame.
- Install the rear seat belt center retractor nut and tighten to 35 N·m (26 lb ft).
- Install the seat belt into the retractor bracket by guiding the belt through the slot in the bracket.
- Install the rear seat back pad and cover. Refer to Rear Seat Back Cushion Cover and Pad Replacement.
- Install the rear seat back seat belt bezel onto the seat belt.
- Install the seat belt bezel to the seat back.
- Install the seat back bezel push pins.
- Install the rear seat belt anchor to the seat belt buckle bracket with the nut and tighten to 50 N·m (37 lb ft).
- Install the rear seat back assembly. Refer to Rear Seat Number 1 Back Replacement.
Caution: Refer to Fastener Caution in the Preface section.
