GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Saturn 🢒 2007 🢒 AURA 🢒 Engine 🢒 Engine Controls and Fuel - 3.6L 🢒 Engine Support Fixture

Special Tools

    â€¢ J 28467-B Universal Engine Support Fixture
    â€¢ J 36857 Engine Support Adapter
    â€¢ J 28467-500 Engine Support Fixture

Installation Procedure
  1. Remove the fuel injector sight shield. Refer to Fuel Injector Sight Shield Replacement .
  2. Remove the air cleaner assembly. Refer to Air Cleaner Assembly Replacement .
  3. Remove the air cleaner outlet duct. Refer to Air Cleaner Outlet Duct Replacement .
  4. Remove the engine mount bracket. Refer to Engine Mount Bracket Replacement - Right Side .
  5. Remove power steering reservoir and place aside. Refer to Remote Power Steering Fluid Reservoir Replacement .
  6. Remove intake cam sensor. Refer to Camshaft Position Sensor Replacement - Bank 1 (Right Side) Intake .
  7. Remove the upper intake manifold. Refer to Upper Intake Manifold Replacement .

    8. Object Number: 1850615 Size: SH
  8. Install the engine mount bracket with the engine support bracket J 36857 to the engine.

    9. Object Number: 1850616 Size: SH
  9. Remove engine harness clip from the holding stud.

    10. Object Number: 1850633 Size: SH
  10. Remove engine harness clamp, then position harness aside.

    11. Object Number: 1850635 Size: SH
  11. Install engine support bracket J 36857 to left cylinder head.

    12. Object Number: 190573 Size: SH
  12. Install the thread support nuts J-28467-33A onto the strut attaching studs.
  13. Install the strut tower support assemblies J-28467-5A over the thread support nuts J-28467-33A.
  14. Install the T-bolts J-28467-5 with 5/16 inch washers through the strut tower support assemblies J-28467-5A into the thread support nuts J-28467-33A. Hand tighten the bolts.
  15. Install the strut tower tube J-28467-3 into the strut tower support assemblies J-28467-5A.
  16. Install the 1/2 inch x 2.5 inch quick release pin J-28467-10 through the strut tower support assemblies J-28467-5A and the strut tower tube J-28467-3 on one side only.

    17. Object Number: 287861 Size: SH
  17. Install 2 front support assembly J-28467-4A and 2 radiator shelf tube J-28467-2A to the strut tower tube J-28467-3.

    18. Object Number: 190646 Size: SH
  18. Install the cross bracket assembly J-24867-1A to secure the radiator shelf tube J-28467-2A to the strut tower tube J-28467-3.

    19. Object Number: 682139 Size: SH
  19. Assemble the lift hook wing nut J-28467-34 and the lift hook bracket J-28467-6A to the lift hook J-28467-7A.

    20. Object Number: 682301 Size: SH
  20. Install lift hook assembly to the radiator shelf tube (2).

    21. Object Number: 1850651 Size: SH
  21. Install lift hook assembly to the left side J-42451-1.

    22. Object Number: 682139 Size: SH
  22. Assemble the lift hook wing nut J-28467-34 and the lift hook bracket J-28467-6A to the lift hook J-28467-7A.

    23. Object Number: 682301 Size: SH
  23. Install lift hook assembly to the radiator shelf tube (2).

    24. Object Number: 1883603 Size: SH
  24. Install lift hook assembly to right side J-42451-1.
  25. Tighten the J 28467-34  wing nut  until all free slack is removed from the J 28467-7A lift hook.