GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Saturn 🢒 2007 🢒 AURA 🢒 Engine 🢒 Engine Mechanical - 3.6L 🢒 Intake Manifold Tuning Valve Replacement

Removal Procedure

    Object Number: 1839426 Size: SH
  1. Remove the fuel injector sight shield. Refer to Fuel Injector Sight Shield Replacement .
  2. Disconnect the engine wiring harness electrical connector (1) from the intake manifold tuning valve.
  3. Unbolt and reposition the power steering pump reservoir bracket.

    4. Object Number: 1839938 Size: SH
  4. Remove the intake manifold tuning valve bolts.
  5. Remove the intake manifold tuning valve.

Installation Procedure

    Object Number: 1839938 Size: SH
  1. Lubricate the intake manifold tuning valve O-ring seal with clean engine oil.
  2. Install the intake manifold tuning valve.

    3. Notice: Refer to Fastener Notice in the Preface section.

  3. Install the intake manifold tuning valve bolts.

    4. Tighten
    Tighten the bolts to 10 N·m (89 lb in).

  4. Position the power steering pump reservoir bracket and install the bolts.

    5. Tighten
    Tighten the bolts to 9 N·m (80 lb in).


    Object Number: 1839426 Size: SH
  5. Connect the engine wiring harness electrical connector (1) to the intake manifold tuning valve.
  6. Install the fuel injector sight shield. Refer to Fuel Injector Sight Shield Replacement .