Preliminary Procedures

1. Remove the fuse labeled HVAC CTRL (BATT).
2. Completely open the instrument panel compartment door by pressing both tabs that support the stop bumpers. Refer to Instrument Panel Compartment Replacement .
3. Disconnect the air temperature actuator electrical connector.

1

Air Temperature Actuator Screw (Qty: 2)

Notice: Refer to Fastener Notice in the Preface section.

Tighten
1.5 N·m (13 lb in)

2

Air Temperature Actuator

Tip

1. Do not adjust any controls on the HVAC control assembly while the HVAC control assembly and actuators are calibrating. If interrupted improper HVAC performance will result.
2. Refer to Control Module References for programming and set up information.