System
| DTCs Required to Set System Status to YES
|
If an I/M System Status indicator did NOT update to YES during the
Inspection/Maintenance (I/M) Complete System Set Procedure
, review each indicator and reference this table to determine each DTC associated with
the I/M System Status Indicator. Each DTC listed below has specific conditions that must be met for the diagnostic to run. Included within the conditions are additional DTCs which, if set, may inhibit the DTCs listed below from running. Reviewing and operating
the vehicle within the Conditions for Running for each DTC listed below will allow the I/M System Status Indicators to transition to YES.
|
Catalyst Monitor
| DTC P0420 or P0430--Refer to
DTC P0420 or P0430
.
|
Evaporative Emission (EVAP)
|
|
Oxygen Sensor
|
|
Oxygen Sensor Heater
|
|