1

Front Side Door Center Molding Assembly

Procedure

1. When removing protective liners from adhesive tape, be careful not to touch tape with hands and do not allow tape to come in contact with dirt or any foreign matter prior to adhesion.
2. Use a J 25070 or equivalent to remove the bodyside molding. Clean all adhesive from the door side, wipe surface dry with a clean lint-free towel prior to installing new side door moldings.
3. Close the door prior to installing the new molding.
4. Align molding integral pin to round hole in door bodyside, peel adhesive tape protective liner from molding and secure the bodyside center molding to the door.

2

Rear Side Door Center Molding Assembly

Procedure

1. When removing protective liners from adhesive tape, be careful not to touch tape with hands and do not allow tape to come in contact with dirt or any foreign matter prior to adhesion.
2. Use a J 25070 or equivalent to remove the bodyside molding. Clean all adhesive from the door side, wipe surface dry with a clean lint-free towel prior to installing new side door moldings.
3. Close the door prior to installing the new molding.
4. Align molding integral pin to round hole in door bodyside, peel adhesive tape protective liner from molding and secure the bodyside center molding to the door.