Preliminary Procedure

Remove the hood insulator and disconnect the windshield washer hose. Refer to Hood Insulator Replacement

1

Hood Strut

Tip
Use a flat bladed screwdriver to release the hood strut retaining tabs.

2

Upper Hood Hinge Bolts (Qty: 4)

Notice: Refer to Fastener Notice in the Preface section.

Tip
Use a grease pencil to mark the alignment of the hinges before removing.

Tighten
25 N·m (18 lb ft)

3

Hood

Caution:  When a hood hold open device is being removed or installed, provide alternate support to avoid the possibility of damage to the vehicle or personal injury.

Tip