Preliminary Procedures

1. Remove the plenum to hood seal plastic retainer. Refer to Seal Replacement - Plenum to Hood .
2. Remove the appropriate headlamp. Refer to Headlamp Replacement .
3. Remove the rocker panel molding. Refer to Rocker Panel Molding Replacement .
4. Remove the front side turn signal lamp assembly. Refer to front side turn signal lamp Replacement Front Side Turn Signal Lamp Replacement .
5. Remove front fender insulator. Refer to Front Fender Insulator Replacement .

1

Front Fender Bolt (Qty: 8)

Notice: Refer to Fastener Notice in the Preface section.

Tip
Use a grease pencil to mark the alignment of the fender before removing the bolts.

Tighten
9 N·m (80 lb in)

2

Front Fender

Tip