Power Steering Fluid Reservoir Replacement - Off Vehicle LZ4

1. Remove the power steering pump. Refer to Power Steering Pump Replacement .
2. Place the power steering pump on a fixed, flat surface, with the power steering pump shaft facing upward.



3. Using a screwdriver, position the power steering fluid reservoir retaining clip tabs outward, and slide them way from the power steering pump.



4. Remove the power steering fluid reservoir from the power steering pump.
5. Remove and discard the power steering fluid reservoir O-ring seal.

1. Lubricate the NEW power steering fluid reservoir O-ring seal with power steering fluid and install it onto the neck of the power steering fluid reservoir.



2. Install the power steering fluid reservoir to the power steering pump.
3. Press the power steering fluid reservoir into the power steering pump until the neck is completely engaged.



4. Align the feet of the power steering fluid reservoir with the sides of the power steering pump.
5. Install the 2 power steering fluid reservoir retaining clips. Ensure the power steering fluid reservoir retaining clip tabs fully engage with the power steering pump.
6. Install the power steering pump. Refer to Power Steering Pump Replacement .