Removal Procedure
- It is only necessary to lower the headliner. Only do those step in headliner replacement that will lower the headliner enough to gain access to the part.
Refer to
Headlining Trim Panel Replacement
.
- Pull the sunshade stop from the sunroof cable drive tube retainer. Carefully scrape off any remaining foam.
- Use a clean rag and 3M™ General Purpose Adhesive Cleaner 08984 or equivalent, in order to remove any adhesive or residue from the sunshade track.
Installation Procedure
- Remove the backing paper from the sunshade stop to expose the adhesive surface.
- Position the sunshade stop to the sunroof cable drive tube retainer.
- Firmly press the sunshade stop onto the retainer.
- Install the headliner. Refer to
Headlining Trim Panel Replacement
.