Callout
| Component Name
|
Preliminary Procedure
- Recover the refrigerant. Refer to
Refrigerant Recovery and Recharging .
- Remove the air cleaner intake duct from the air cleaner assembly. Refer to
Air Cleaner Inlet Duct Replacement.
- Raise and support the vehicle. Refer to
Lifting and Jacking the Vehicle .
- Remove the right front fender liner. Refer to
Front Fender Liner Replacement .
|
1
| A/C Compressor and Condenser Connector
Tip
- Insert 2 small screwdrivers into the 2 slots of the compressor hose and suction line connector and release locking tabs.
- Remove the A/C compressor hose from the evaporator hose assembly and discard O-rings. Refer to
O-Ring Replacement .
|
2
| A/C Compressor Hose Clip Bracket Bolt
Notice: Refer to Fastener Notice in the Preface section.
Tighten
10 N·m (89 lb in) |
3
| A/C Compressor Hose Nut
Tip
Remove the A/C compressor hose from the A/C compressor and cap hose.
Tighten
20 N·m (15 lb ft) |
4
| Sealing Washer
Tip
Remove and discard sealing washers. Refer to
Sealing Washer Replacement . |
5
| A/C Compressor Hose Bolt
Tighten
20 N·m (15 lb ft) |
6
| Sealing Washer
Tip
Remove and discard sealing washers. Refer to
Sealing Washer Replacement . |
7
| A/C Compressor Hose Assembly
Tip
- Note routing of the A/C compressor hose to ensure proper routing.
- Using
J 39400 leak test A/C compressor hose connections.
|
