Preliminary Procedures

1. Remove the left instrument panel closeout/insulator panel. Refer to Instrument Panel Insulator Panel Replacement - Left Side .
2. Remove the left outer trim cover. Refer to Instrument Panel Outer Trim Cover Replacement .
3. Remove the instrument panel center molding removal. Refer to Instrument Panel Center Molding Replacement .
4. Remove the console assembly. Refer to Console Replacement .

1

Knee Bolster Assembly Screw (Qty: 2)

Notice: Refer to Fastener Notice in the Preface section.

Tighten
2 N·m (18 lb in)

2

Knee Bolster Assembly

Tip

1. Disconnect the electrical connections.
2. If replacing the knee bolster, transfer all necessary components.

3

Retainer Clip (Qty: 6)