GM Service Manual Online
For 1990-2009 cars only

Removal Procedure

    Caution: Ensure that the vehicle is properly supported and squarely positioned. To help avoid personal injury when a vehicle is on a hoist, provide additional support for the vehicle on the opposite end from which the components are being removed.

  1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .

  2. Object Number: 1229805  Size: SH
  3. Remove the front transaxle mount through bolt.

  4. Object Number: 1229807  Size: SH
  5. Remove the transaxle mount-to-transaxle attachment bolts.
  6. Remove the transaxle mount from the vehicle.

Installation Procedure

    Notice: Refer to Fastener Notice in the Preface section.


    Object Number: 1229807  Size: SH
  1. Install the transaxle mount into the vehicle and tighten the bolts.
  2. Tighten
    Tighten the transaxle mount bolts to 90 N·m (66 lb ft).


    Object Number: 1229805  Size: SH
  3. Install the transaxle mount through bolt.
  4. Tighten
    Tighten the transaxle mount through bolt to 90 N·m (66 lb ft).

  5. Lower the vehicle .