Preliminary Procedures

1. Remove the bolt holding the air cleaner outlet duct to the upper front bumper fascia grille. Refer to Air Cleaner Outlet Duct Replacement
2. Remove both front fender liners. Refer to Front Fender Liner Replacement
3. Remove the engine splash shield. Refer to Engine Splash Shield Replacement

1

Front Bumper Fascia Bracket Bolts (Qty: 2)

Notice: Refer to Fastener Notice in the Preface section.

Tip
Access the bolts through the front fender liner openings.

Tighten
6 N·m (53 lb in)

2

Front Bumper Fascia To Tie Bar Bolts (Qty: 4)

Tighten
6 N·m (53 lb in)

3

Front Fascia Bumper To Tie Bar Retaining Clips (Qty: 2)

4

Front Bumper Fascia To Headlamp Bolts (Qty: 2)

Tighten
2 N·m (18 lb in)

5

Front Bumper Fascia

Tip