GM Service Manual Online
For 1990-2009 cars only
Makes
›
Saturn
›
2009
›
AURA
›
Engine
›
Engine Controls and Fuel - 2.8L, 3.0L, 3.2L, or 3.6L
› Knock Sensor Replacement - Bank 1
Search
Knock Sensor Replacement - Bank 1 for Saturn AURA 2009
Removal Procedure
Remove the exhaust manifold lower heat shield. Refer to
Exhaust Manifold Lower Heat Shield Replacement
.
Disconnect the engine wiring harness electrical connector (1) from the bank 1 knock sensor.
Loosen the knock sensor bolt and remove the knock sensor.
Installation Procedure
Caution:
Refer to
Fastener Caution
in the Preface section.
Position the knock sensor and tighten the knock sensor bolt to
23 N·m (17 lb ft)
.
Connect the engine wiring harness electrical connector (1) to the bank 1 knock sensor.
Instal the exhaust manifold lower heat shield. Refer to
Exhaust Manifold Lower Heat Shield Replacement
.