GM Service Manual Online
For 1990-2009 cars only
Makes
๐ข
Saturn
๐ข
2009
๐ข
AURA
๐ข
Engine
๐ข
Engine Controls and Fuel - 2.8L, 3.0L, 3.2L, or 3.6L
๐ข Knock Sensor Replacement - Bank 2
Removal Procedure
Raise and support the vehicle. Refer to
Lifting and Jacking the Vehicle
.
Disconnect the engine wiring harness electrical connector (2) from the bank 2 knock sensor.
Loosen the knock sensor bolt and remove the knock sensor.
Installation Procedure
Caution:
Refer to
Fastener Caution
in the Preface section.
Position the knock sensor and tighten the knock sensor bolt to
23 Nยทm (17 lb ft)
.
Connect the engine wiring harness electrical connector (2) to the bank 2 knock sensor.
Lower the vehicle.